5-11
bizhub PRESS C71cf
5
J-3152 62 Fixing/delivering
section
Fusing loop sensor
error.
Remove paper in-
side the main body,
and then open and
close the front door
of the main body.
For instructions on
how to remove pa-
per, refer to
page 5-12.
J-3210 62 Paper does not
reach to the pre-
transfer sensor.
J-3211 62 Delivering sensor
error.
J-3251 62 Fusing unit too hot. Remove paper in-
side the main body,
and then open and
close the front door
of the main body af-
ter completing the
fixing cooling. For
instructions on how
to remove paper,
refer to page 5-12.
J-3252 62 Delivering sensor
error.
Remove paper in-
side the main body,
and then open and
close the front door
of the main body.
For instructions on
how to remove pa-
per, refer to
page 5-12.
J-5101 - Main body front
door
Main body front
door is open.
J-5102 63 Roll Winder RW-
101/
Roll Winder RW-
201
Error related to Roll
Winder RW-
101/Roll Winder
RW-201 (while
printing or convey-
ing paper)
1. Remove paper in-
side the main body,
and then open and
close the front door
of the main body.
For instructions on
how to remove pa-
per, refer to
page 5-12.
2. Check the status
of Roll Winder RW-
101 and Roll Wind-
er RW-201. For de-
tails, refer to the
HTML User's
Guide.
J-5103 63 Roll Winder RW-
101/
Roll Winder RW-
201
Error related to Roll
Winder RW-
101/Roll Winder
RW-201 (except for
J-5102)
1. Check the condi-
tion and tension val-
ue of paper set, and
then open and close
the front door
of
the main body.
2. Check the status
of Roll Winder RW-
101 and Roll Wind-
er RW-201. For de-
tails, refer to the
HTML User's
Guide.
JAM Code Jam location num-
ber
Where to check Function Instructions
To Next Page
Loading...
