4-29
4.3 Weekly Cleaning
E Press [Start Convey].
The media goes through the main body and stops automatically.
NOTICE
When the status indicator under Roll Winder RW-101 on the [MACHINE] screen on the touch panel of the main
body lights in red, it indicates that an error occurred. Check the error and solve the problem.
For details, refer to the HTML User's Guide.
Using a hard thick media with the tension roller 2 set to "Top" may cause paper jams. If jams occur frequently,
change the position of the tension roller 2 to "Bottom". For details about changing the position, page 3-15.
F Close the top cover of leading section.
Before closing the top cover, confirm that the rolling edge is not out of guide.
G Tape the media on the workbench.
For details, refer to page 3-24.
H Conveys the media.
For details, refer to page 3-19.
To Next Page
Loading...
