Korg microSTATION - Connections; Connecting Audio Equipment

Setup
12
Connections
Connectionsmustbemadewiththepowerturnedoff.Pleasebeawarethat carelessoperationmaydamageyour
speakersystemorcausemalfunctions.
Connecting audio equipment
Here’showtoconnectthemicroSTATIONtoyour
analogampormixer.
Ifyou’veconnectedastereoaudioamp,beaware
thatplayingathighvolumemaydamageyour
speakersystem.Becareful nottoraisethevolume
excessively.
OUTPUT L/MONO and R
Allofthefactorysoundsusetheseoutputs.
1. ConnecttheOUTPUTL/MONOandRoutputsto
theinputsofyourpoweredmonitorormixer.
Ifyou’reusingthemicroSTATIONinstereo,use
boththeL/MONOandRjacks.Ifyou’ reusingthe
microSTATIONinmono,useonlytheL/MONO
jack.
Ifyou’replayingbackthroughastereoaudioamp
oracassetterecorderthathasanexternalinputjack,
connectthemicroSTATIONtothejacks(s)labeled
LINEIN,AUXIN,orexternalinput.(Usean
adaptercablewiththeappropriatetypeofplug.)
Headphones
1. Ifyou’reusingheadphones,connectthemtothe
microSTATION’sheadphonejack.
2. UsetheVOLUMEslidertoadjustthevolumeof
theheadphones.
ThemicroSTATION’sheadphonejackoutputsthe
samesignalastheOUTPUTL/MONOandRjacks.
Connections to computers
AC adapter power
supply connector
Analog audio output
Connecting the AC adapter
Powered
monitors, etc.
Connections to MIDI equipment
MIDI cable
Computer
Pedal connections etc.
MIDI keyboard
Mixer
to an AC outlet
USB
ASSIGNABLE PEDAL
ASSIGNABLE SWITCH
DAMPER
MIDI OUT
MIDI IN
MIDI IN
MIDI OUT
INPUT
AUDIO OUTPUT
R L/MONO
Monitor OUTPUT
INPUT
Powered
monitor
Headphone
INPUTINPUT
L/MONO R
PHONES