Korg microSTATION - Error Messages; Various Messages

Appendix
68
Error messages
Various messages
A
Access denied
Meaning: Thiswillappearifyouattempttoexecutethe
songcommand“MemoryStatus”while
playingorrecordingonthesequencer.
Action: Stopthesequencerbeforeyouexecutethesong
command“MemoryStatus.”
C
Can’t calibrate
Meaning: Calibrationcouldnotbeperformedcorrectly.
Action: Trytheoperationagain.
Can’t undo
Meaning: Freememoryforundoing(theCompare
function)couldnotbeallocatedwhenyou
finishedrecordinginSequencermode,or
whenyouexecutedanedit.Thedatayoujust
recordedoreditedwillremain,butundo
(Compare)cannotbeexecuted.
Action: Inordertoallocatesufficientfreememoryfor
undo(Compare)tobeavailable,youcandelete
unneededsongortrackdata.Werecommend
thatyousaveyourdatatomediabefore
executing.
Completed
Meaning: Thecommandwasexecuted,andcompleted
Action: Thecommandyouexecutedwassuccessful.
D
DestMeasureEmpty
Meaning: Thereisnodatainthespecifiedmeasure.
Action: Specifyameasurethatcontainsdata.
Dest same as src
Meaning: Whencopying,youselectedthesamesongor
trackasthecopy‐sourceandcopy‐destination.
Action: Makesurethatthecopy‐sourceandcopy‐
destinationaredifferentsongsortracks.
Dest. empty
Meaning: Whenediting,thetrackyouspecifiedcontains
noperformancedata.
Action: Specifyatrackthatcontainsperformancedata.
Dest. song empty
Meaning: Thesongyouspecifiedasthecopy‐
destinationdoesnotexist.
Action: Beforeyoucopy,executethesongcommand
“CreateNew”tocreateasong.
F
File exists
Meaning: Whenexecutingafilerenamecommand,an
identically‐namedfileexistedonthemedia.
Action: Deletetheexistingfile,orspecifyadifferent
name.
File invalid
Meaning: Youattemptedtoloadoropenafilewhose
fileformatwasincorrect.
File not found
Meaning: Whenperformingafiledeletecommand,the
specifiedfiledidnotexist.
Action: Checkthemediaorfile.
File read only
Meaning: Youattemptedtodeleteafile,butthatfilehad
aread‐onlyattribute.
Meaning: Youattemptedtosaveafileusingthesame
nameasaread‐onlyfilethatalreadyexisted
onthemedia.
Action: Savethefileunderadifferentname.
Format failed
Meaning: Anerroroccurredwhileformattingmedia.
Action: Usedifferentmedia.
FX size mismatch
Meaning: Whencopyingorswappingeffects,you
attemptedtoplaceadouble‐sizeeffectatIFX5
(inserteffect5)orMFX2(mastereffect2).
Action: Don’tspecifyadouble‐sizeeffectforIFX5or
MFX2whenexecutingthecommand.
FX type mismatch
Meaning: Thismessagewillappearwhencopyingor
swappingeffectsifthecopy‐destinationor
swap‐destinationIFX(inserteffect),MFX
(mastereffect),orTFX(totaleffect)hasan
effectthatcannotbeselected.
Action: ForeachIFX,MFX,andTFX,someeffectscan 
beselectedandothereffectscannotbeselected.
Verifythattheeffectisonethatcanbeselected
forthecopy‐destinationorswap‐destination
IFX,MFX,orTFX.
I
Illegal name
Meaning: Aninvalidfilenamewasspecified.
Action: Changethefilename.Youmaynotspecifya
filenamethatisinvalidinMS‐DOS.