Korg microSTATION - Compare Button; Function Buttons

Front and rear panels Front panel
3
9. Sequencer
Thebuttonsinthissectionareusedforoperationsin
Sequencermode,suchasrecordingandplayback.
(p. 32).
LOCATE button
REC button
KEY button
WA
(Start/Stop) button
E
(REW)/
R
(FF) button
D
(Pause) button
LOOP button
10.Display
Thisshowsthenamesofprogramsorcombinations,or
thevaluesofparameters.
11.WRITE button
Thisbuttonsavestheprogramorcombination.
12.COMPARE button
Thisbuttoncomparesthesoundorrecordingtake
withtheuneditedorprevioustake.
(p. 8“COMPAREbutton‐theComparefunction”)
13.CURSOR/VALUE
buttons
Usethesebuttonstoselectthepageorparameter
showninthedisplay,ortoeditavalue.
14.Function buttons
PLAY/MUTE button
Ifthisbuttonison(theLEDtotheleftofthebutton
willlight‐up),youcanusethefunctionbuttons01–16
tocontroltheplay/mutestatusoftheoscillators,
timbres,andtracks.Thefunction01–16LEDswill
indicateplay/mutestatusofthecorrespondingitem.
GRID SEQ button
Ifthisbuttonison(theLEDtotheleftofthebutton
willlight‐up),theGridSequencefunctioninSequencer
modewillbeon.Thisletsyouusethefunctionbuttons
01–16andLEDs01–16toeasilycreatedrumpatterns.
NUM LOCK button
Ifthisbuttonison(theLEDtotheleftofthebutton
willlight‐up),functionbuttons01–16willoperateas
nu
merickeys,aclearbutton,anenterbutton,andas
groupup/downbuttonswhenselectingaprogramor
combination.
Function buttons 01–16
Whenthethreebuttonsdescribedaboveareoff
(normalstate),youcanusethesebuttonstodothe
following.
•Toselectprogramsorcombinations.
•(WhentheTIMBRE/TRACKLEDislit)Tose
lecta
timbreortrack.
15.Function LEDs
Function 01–16 LEDs
Whenthethreebuttonsdescribedaboveareoff
(normalstate),theseLEDsindicatethefollowing.
•AnLEDwilllight‐uptoindicatethenumberwithin
thecurrentlyselectedprogramorcombination
category.
•(WhentheTIMBRE/TRACKLEDislit)AnLEDwill
light‐uptoindicatethetimbreortrackthat’s
currentlyselectedforedi
ting.
TIMBRE/TRACK LED
Thiswill
light‐upwhenthefunction01–16buttonsand
LEDscanbeusedtoselecttimbresortracks.
GRID SEQ LED
Thiswilllight‐upinSequencermodewhenyoupress
theGRIDSEQbuttontoturnontheGridSequence
function.
10
9
11 12
13
14
15