Korg RK-100S - CC # Map

36
RK-100S parameter guide
CC # MAP
Control changes can be assigned to main parameters.
All parameters assigned with control changes will change simultaneously. In
addition, if a parameter concerning the long ribbon controller is specied here,
the specied control change will be transmied. All other main parameters can
only be received (see page 58 “MIDI messages”).
(Parameter) [Portamento...Vocoder.EF.SENS]
This selects the parameter to be assigned.
(Value) [O, CC#00...CC#119]
This species the MIDI control change number (CC#) for the parameter selected
in the “Parameter” eld.
Note: If the timbre parameter is selected, the eect will be applied to timbre 1
and timbre 2.
Note: The MIDI channel of the vocoder parameters is the same MIDI channel
for timbre 1.