Korg RK-100S Parameter Guide

51
Eect guide
LFO Waveform [Saw, Square, Triangle, Sine, S&H]
Selects the LFO waveform.
See page 40 “LFO Waveform”
LFO Shape [–63...+63]
See page 40 “LFO Shape”
LFO KeySync [O, On]
Species whether the LFO will be reset by note-on
See page 40 “LFO KeySync”
LFO Init Phase [000...180°]
Sets the starting location of the waveform
Note: This parameter will be displayed and can be set if “LFO KeySync” is On.
See page 41 “LFO Init Phase”
LFO Spread [–180...+180°]
Sets the LFO phase dierence between the le and right channels
Phaser
This eect creates a swell by shiing the phase. You can add spread to the sound
by oseing the phase of the le and right LFOs from each other.
Left
Right
Resonance
LFO Shape
LFO Spread
LFO
Dry / Wet
Dry / Wet
High Damp
Stereo In - Stereo Out
Phaser
Phaser
Dry/Wet [Dry, 99:1...1:99, Wet]
Sets the balance between the eect and dry sounds
Type [BLUE, U-VB]
Selects the phaser type
Manual [000...127]
Sets the frequency to which the eect is applied
Mod Depth [000...127]
Sets the depth of LFO modulation
Resonance [000...127]
Sets the resonance amount
Phase [+, –]
Switches the phase of the output and feedback
LFO Tempo Sync [O, On]
Species whether the LFO cycle will be synchronized with the tempo specied
by the TAP buon or MIDI clock

Korg RK-100S Specifications

General

Polyphony	8 voices
Arpeggiator	Yes
Type	Keytar
LFO	2 LFOs
Keyboard	37 keys (velocity sensitive)
Sound Engine	Analog modeling
Inputs	Audio input
Outputs	1 x 1/4" (audio)
Power Supply	6 x AA batteries or AC adapter
Dimensions	830 x 262 x 71 mm / 32.68 x 10.31 x 2.80 inches
Weight	3.4 kg / 7.50 lbs (excluding batteries)
Effects	Delay
Controllers	Ribbon controller
MIDI	Out
USB	Type B
Oscillators	2 oscillators