49
Eect guide
Chorus
This eect adds thickness and warmth to the sound by modulating the delay time
of the input signal. You can add spread to the sound by oseing the phase of
the le and right LFOs from each other.
Chorus
Chorus
Left
Right
LFO Spread
Dry / Wet
Dry / Wet
Stereo In - Stereo Out
Trim
Trim
HEQ
HEQ
LFO
Dry/Wet [Dry, 99:1...1:99, Wet]
Sets the balance between the eect and dry sounds
Mod Depth [000...127]
Sets the depth of LFO modulation
LFO Frequency [0.01...100.0Hz]
Sets the LFO speed. Increasing this value will result in a faster frequency
See page 40 “LFO Frequency”
LFO Spread [–180...180°]
Sets the LFO phase dierence between the le and right
PreDelay L [00.0...50.0ms]
PreDelay R [00.0...50.0ms]
Sets the delay times for the le and right channels
Trim [000...127]
Sets the input level
High EQ Gain [–15.0...+15.0dB]
Sets the gain of High EQ
Flanger
This eect gives a signicant swell and movement of pitch to the sound. It is more
eective when applied to a sound with a lot of harmonics. This is a stereo anger.
Flanger
Flanger
Left
Right
Feedback
LFO Shape
LFO Spread
LFO
Dry / Wet
Dry / Wet
High Damp (Type: Flanger)
Stereo In - Stereo Out
Dry/Wet [Dry, 99:1...1:99, Wet]
Sets the balance between the eect and dry sounds
Delay [000...30.0ms]
Sets the delay time in millisecond steps
Mod Depth [000...127]
Sets the depth of LFO modulation
Feedback [000...127]
Sets the amount of feedback for the le and right channels
Phase [+, –]
This switches the phase of the output and feedback
LFO Tempo Sync [O, On]
Species whether the LFO cycle will be synchronized with the tempo specied
by the TAP buon or MIDI clock
To Next Page
Loading...
Need help?
General
