Korg RK-100S Parameter Guide

42
RK-100S parameter guide
B1 Gain [–18.0...+18.0dB]
Sets the gain of Band 1
B2 Frequency [20Hz...20kHz]
Sets the center frequency of Band 2
B2 Q [00.5...10.0]
Sets the bandwidth of Band 2
B2 Gain [–18.0...+18.0dB]
Sets the gain of Band 2
B3 Frequency [20Hz...20kHz]
Sets the center frequency of Band 3
B3 Q [00.5...10.0]
Sets the bandwidth of Band 3
B3 Gain [–18.0...+18.0dB]
Sets the gain of Band 3
B4 Type [Peaking, Shelving High]
Selects the EQ type of Band 4
B4 Frequency [20Hz...20kHz]
Sets the center frequency of Band 4
B4 Q [00.5...10.0]
Sets the bandwidth of Band 4
B4 Gain [–18.0...+18.0dB]
Sets the gain of Band 4
Distortion
This is a distortion eect with a three band EQ, giving you a broad range of
variations.
Left
Right
Dry / Wet
Dry / Wet
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
+
3 Band PEQ
Output Level
Pre EQ
Distortion
Dry/Wet [Dry, 99:1...1:99, Wet]
Sets the balance between the eect and dry sounds
Gain [000...127]
Sets the degree of distortion
Pre EQ Frequency [20Hz...20.0kHz]
Sets the center frequency of Pre EQ
Pre EQ Q [00.5...10.0]
Sets the bandwidth of Pre EQ
Pre EQ Gain [–18.0...+18.0dB]
Sets the gain of Band PreEQ
B1 Frequency [20Hz...20kHz]
Sets the center frequency of Band 1
B1 Q [00.5...10.0]
Sets the bandwidth of Band 1
B1 Gain [–18.0...+18.0dB]
Sets the gain of Band 1

Korg RK-100S Specifications

General

Polyphony	8 voices
Arpeggiator	Yes
Type	Keytar
LFO	2 LFOs
Keyboard	37 keys (velocity sensitive)
Sound Engine	Analog modeling
Inputs	Audio input
Outputs	1 x 1/4" (audio)
Power Supply	6 x AA batteries or AC adapter
Dimensions	830 x 262 x 71 mm / 32.68 x 10.31 x 2.80 inches
Weight	3.4 kg / 7.50 lbs (excluding batteries)
Effects	Delay
Controllers	Ribbon controller
MIDI	Out
USB	Type B
Oscillators	2 oscillators