Korg RK-100S - Amp; Band

32
RK-100S parameter guide
AMP
Here are the parameters for modulation and vocoder output.
VOCODER LEVEL [000...127]
Sets the output level of the vocoder.
DIRECT LEVEL [000...127]
Sets the volume level at which the modulatior input source will be output directly
(unaected).
BAND
These parameters specify the output level and panning (stereo position) for each
of the carrier’s sixteen band-pass lters (the synthesis lter).
PAN1...16 [L63...R63]
Species the output level of each band.
LEVEL1...16 [000...127]
Species the panning of each band.