64
RK-100S parameter guide
System exclusive messages
RK-100S format
F0: exclusive status
42: Korg ID
3n: [n=0–F] MIDI channel
00, 01, 19: RK-100Smodel ID
: function ID (type of message)
|
F7: end of exclusive
Universal system exclusive
System exclusive messages include a special category of messages whose purpose
is ocially dened. These are called universal system exclusive messages. Of
these universal system exclusive messages, the RK-100S supports Master Volume
and Master Fine Tuning.
Master volume [F0, 7F, nn, 04, 01, vv, mm, F7]
(vv: lower byte of value, mm: upper byte of value, [mm, vv=7F, 7F] is Max, [mm,
vv=00, 00] is 0)
When a Master Volume message is received, the RK-100S will adjust its overall
volume.
Master ne tuning [F0, 7F, nn, 04, 03, vv, mm, F7]
(A value of 8192 [mm, vv=40, 00] is center (0 cent, A4=440.0Hz), 4096 [mm, vv=20,
00] is -50 cents, and 12288 [mm, vv=60, 00] is +50 cents.)
When master ne tuning is received, the value specied for the RK-100S’s
GLOBAL “Master Tune” will be ignored, and the overall pitch will be specied
by the data that was received.
Realtime Messages
Starting/stopping the arpeggiator
When the RK-100S’s arpeggiator is synchronized to a connected external MIDI
device, system realtime messages Start and Stop will control the arpeggiator.
Start [FA]
When the Start [FA] message is received, the arpeggio paern will be reset to
its beginning.
Stop [FC]
When a Stop [FC] message is received, the arpeggiator will stop. (It will not be
turned o; the arpeggiator will start again when additional notes are played.)
To Next Page
Loading...
Need help?
General
