40
RK-100S parameter guide
Mod Intensity [–63...+63]
Adjusts the depth of modulation applied by the modulation source
Mod Response [000...127]
Adjusts the response of the modulation eect
A seing of 0 produces slow response.
LFO Tempo Sync [O, On]
Species whether the LFO cycle will synchronize to the tempo set by the TAP
buon or via the MIDI clock
If this is O, the LFO will function at the cycle specied by “LFO Frequency”
If this is On, the LFO will synchronize to the tempo or MIDI clock.
Note:
This parameter will be displayed and can be set if the “Mod Source” is LFO.
Note:
In the Global MIDI “MIDI Clock” seing is Internal, the LFO will synchro-
nize to the tempo specied by the TAP buon. If the seing is Auto, the LFO
will synchronize to the MIDI clock received from an external MIDI device.
LFO Frequency [0.01...100.0Hz]
Sets the LFO speed. Increasing this value will result in a faster frequency
Note: This parameter will be displayed and can be set if the “Mod Source” is
LFO and the “LFO Tempo Sync” is O.
If this parameter is assigned to the “Long Ribbon (Filter)”, it can be switched
to “LFO Sync Note” if “LFO Tempo Sync” is On.
LFO Sync Note [8/1...1/64]
Sets the LFO frequency as a proportion of the tempo set by the TAP buon
The length of the specied value (note value) relative to the tempo will be one
cycle of the LFO. For example if this is 1/4, one cycle will occupy one quarter note.
For example if this is set to 1/4, the LFO cycle will be one beat long. If this is set
to 3/4, the LFO cycle will be three beats long.
Note: This parameter will be displayed and can be set if the “Mod Source” is
LFO and if “LFO Tempo Sync” is On.
If this parameter is assigned to the “Long Ribbon (Filter)”, it can be switched
to “LFO Sync Note” if “LFO Tempo Sync” is O.
LFO Waveform [Saw, Square, Triangle, Sine, S&H]
Selects the LFO waveform
Note:
This parameter will be displayed and can be set if the “Mod Source” is LFO.
TRIANGLE
SQUARE
S&H
Amplitude changes irregularly
(Sample & Hold)
LFO Shape [–63...+63]
Adjusts the shape of the LFO waveform
Note:
This parameter will be displayed and can be set if the “Mod Source” is LFO.
LFO KeySync [O, On]
Species how the LFO will be reset at note-on
Note:
This parameter will be displayed and can be set if the “Mod Source” is LFO.
With O, the LFO phase will not be reset when note-on occurs.
With On, the rst note-on from a condition of no keys being pressed will reset the
LFO to the phase specied by the “LFO Init Phase” parameter and modulation
will be applied at that phase even if subsequent note-ons occur.
To Next Page
Loading...
Need help?
General
