Krone 1022623 - Setting the Net Layers; Setting the Automatic Blocking Time

9 KRONE ALPHA operation unit
9.5 Setting the net layers
100
Comprima F 155
Original Operating Instructions 150001049_01_en
INFORMATION
The tying process can be started at any time by pressing the key.
9.5 Setting the net layers
2
3
4
5
6
7
8
10
A B C D E F G H
9
4
2
EQ000-093
 To increase the number of net layers, press the
key.
 To reduce the number of net layers, press the
key.
The LEDs on the bargraph(2) show the set value. The following values can be set:
Bale size LEDA LEDB LEDC LEDD LEDE LEDF LEDG LEDH
900 1.7 2.6 3.5 4.4 5.3 6.2 7.1 8.0
1000 1.5 2.3 3.1 3.9 4.8 5.6 6.4 7.2
1100 1.4 2.1 2.8 3.6 4.3 5.1 5.8 6.5
1200 1.3 1.9 2.6 3.3 4.0 4.6 5.3 6.0
1300 1.2 1.8 2.4 3.0 3.7 4.3 4.9 5.5
1400 1.1 1.7 2.2 2.8 3.4 4.0 4.6 5.1
1500 1.0 1.5 2.1 2.6 3.2 3.7 4.3 4.8
1600 0.9 1.4 2.0 2.5 3.0 3.5 4.0 4.5
1700 0.9 1.4 1.8 2.3 2.8 3.3 3.8 4.2
1800 0.8 1.3 1.7 2.2 2.6 3.1 3.5 4.0
9.6 Setting the automatic blocking time
The automatic blocking time is the period of time until automatic wrapping is triggered. It starts
for the first time when the operation unit is switched on. It subsequently starts at the end of the
last tying cycle.
 Briefly after the operation unit has been switched on with the
key, press the key
and hold down.