EasyManua.ls Logo

Krone 1022623 - Removing;Mounting the Safety Device Which Prevents Unauthorised Use; Operating Brake Force Regulator

Krone 1022623
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 Operation
8.9 Removing/mounting the safety device which prevents unauthorised use
78
Comprima F 155
Original Operating Instructions 150001049_01_en
8.9 Removing/mounting the safety device which prevents unauthorised
use
The safety device is used to prevent unauthorised use when the machine has been switched
off.
ü The machine has been parked, refer to page157.
For version with "ball-head attachment" or "drawbar eye attachment"
1
3
1
2
3
2
I
II
KS000-414
I Version with ball-head attachment II Version with drawbar eye attachment
Removing
Remove the padlock(1), the latch(2) and the bracket(3) and take them with you.
Mounting
Mount the bracket(3) with the latch(2) and secure with the padlock(1) and keep the key in
a safe place.
8.10 Operating brake force regulator
For version with "Single axle with compressed air brake" or "Tandem axle with
compressed air brake"
1
I
II
III
RP000-873
The brake force regulator(1) regulates the brake force of the compressed air brake. The brake
force may be reduced under certain conditions in use. When driving on public roads, the brake
force regulator(1) must be set to full load (I). The following positions are possible:

Table of Contents

Related product manuals