Krone 1022623 - Preparing the Machine for Shipment; Securing the Side Hoods

Driving and transport 16
Preparing the machine for shipment 16.5
Comprima F 155
Original Operating Instructions 150001049_01_en 159
1
RPG000-074
The 2reflectors(1) are located on the rear of the rear lamps.
 Clean the reflectors (1).
16.5 Preparing the machine for shipment
WARNING
Risk of accident due to unsecured machine parts
If the machine is not secured properly for transportation on a lorry or train, the parts may
come loose unintentionally due to the airstream. This may result in serious accidents or
damage to the machine.
 Carry out the following measures to secure moving machine parts.
16.5.1 Securing the side hoods
1
2
4
3
RPG000-070
Make the following setting on the right and left sides of the machine:
 Open the side hood(1).
 Guide a cable tie(2) through the openings of the flap lock(3).
 Carefully close the side hood(1).
 Lay the cable tie(2) around the lock holder(4) and tighten it.