Krone 1022623 - Securing the Storage Compartment Flap; Mounting the Tensioning Device

16 Driving and transport
16.5 Preparing the machine for shipment
160
Comprima F 155
Original Operating Instructions 150001049_01_en
16.5.2 Securing the storage compartment flap
1
2
2
3
RP000-367
 To secure the storage compartment flap(1), place a strap(2) around the storage
compartment flap(1) and the protective tube(3) and tighten.
16.5.3 Mounting the tensioning device
To reduce the height of the machine for transport, a tensioning device can be mounted on the
tensioning arms of the machine.
KRONE special tool(1) Order number
Tensioning device of bale formation conveyor 20 062 406*
2
1
5
3
4
6
RPG000-072
Example image
Make the following settings on the right and left sides of the machine:
 Unscrew the bolt(1).
 Mount connecting pipe(6) with the screw connection(5).
 Mount slip-on bushing (4) with screw connection (3).
 Tighten the screw(2) equally on both sides of the machine until the tensioning arms are
released.
 Mount the bolt (1).