Krone 1022623 - Automatic Call of the Road Travel Screen; Adjusting the Baling Pressure

14 Terminal machine functions
14.7 Automatic call of the Road travel screen
122
Comprima F 155
Original Operating Instructions 150001049_01_en
14.7 Automatic call of the Road travel screen
EQG000-026
The terminal switches automatically to the Road travel screen after roughly fiveminutes when
the following requirements are met:
ü The PTO shaft is switched off.
ü The tailgate is closed.
ü The machine is in field mode.
14.8 Adjusting the baling pressure
100
50
0
60
%
40/
100
50
0
60
%
40/
1
2
EQG003-038
1 Set target baling pressure as % 2 Actual baling pressure as %
Adjusting the baling pressure via the scroll wheel
 Select the blue value to be changed using the scroll wheel.
ð The icon is shown in reverse colours.
 Press the scroll wheel.
ð An input field opens.
 To increase or reduce the value, turn the scroll wheel.
 To save the value, press the scroll wheel.
ð The setting is accepted, the input field closes.