Krone 1022623 - Lubricating the Universal Shaft; Tightening Torques

Maintenance 18
Lubricating the universal shaft 18.3
Comprima F 155
Original Operating Instructions 150001049_01_en 185
Every 50 operating hours
(2)
18.3 Lubricating the universal shaft
RP000-176
ü The machine is shut down and safeguarded, refer to page27.
 Observe operating instructions of the universal shaft manufacturer.
 Clean the universal shaft.
 Lubricate the universal shaft with multi-purpose grease at the intervals indicated in the table
below.
For a list of the lubricating greases to be used, refer to page43.
The following table provides information about the lubricant quantity and the lubrication interval
per lubrication point.
Pos. Lubricant quantity Lubrication interval
(1) 18 g 50 hours
(2) 30 g
(3) 20 g
(4) 6 g
18.4 Tightening torques
Deviating tightening torques
All screw connections must in general be tightened with the listed tightening torques following.
Deviations from the tables are marked accordingly.