Krone 1022623 - Operating the Bale Counter; Pick-Up; Bringing the Pick-Up to Transport;Working Position

Operation 8
Operating the bale counter 8.11
Comprima F 155
Original Operating Instructions 150001049_01_en 79
Position Brake force
(I) Full load (1/1)
(II) Half load (1/2)
(III) switched off (0)
 Turn the brake force regulator(1) in the direction of the arrow to the required position.
8.11 Operating the bale counter
For “medium electronics” version
1
2
RPG000-178
The bale counter(1) is actuated every time the tailgate is opened. The bale counter(1)
is located on the left side of the machine behind the side hood.
Resetting bale counter to 0
 Press the knurled head screw(2) and hold it down until the bale counter(1) displays 0000.
8.12 Pick-up
8.12.1 Bringing the pick-up to transport/working position
Working position
WARNING!Risk of injury due to falling pick-up! While the pick-up is being lowered,
remove people from the movement range of the pick-up.
 To preselect the pick-up, press the
key on the terminal, refer to page116.
ð The key switches to
.
 To lower the pick-up into the working position, actuate the control unit on the tractor (yellow,
3+).
Transport position
 To preselect the pick-up, press the
key on the terminal, refer to page116.