Krone 1022623 - Drive Chain of the Auger Conveyor; Drive Chain of the Starter Roller and the Lower Compression Roller

18 Maintenance
18.17 Adjust drive chains
202
Comprima F 155
Original Operating Instructions 150001049_01_en
18.17.4 Drive chain of the auger conveyor
1
2
X
3
4
RP000-473
The drive chain(2) of the left auger conveyor is on the left side of the machine behind the pick-
up guard(1).
The dimensionX of the tensioned spring length(3) must be X=60mm.
ü The machine is shut down and safeguarded, refer to page27.
ü The pick-up guard(1) has been removed.
ü The drive chain(2) and the pick-up guard have been cleaned.
 To tension the drive chain(2), use the nut(4) to set the dimension X=60mm.
INFORMATION
The drive chain is supplied with oil via the central chain lubrication system, refer to page94.
18.17.5 Drive chain of the starter roller and the lower compression roller
1
2
X
3
RP000-474
The drive chain(1) of the starter roller and lower compression roller is located on the right side
of the machine.
The dimensionX of the tensioned spring length(3) must be X=220mm.
ü The machine is shut down and safeguarded, refer to page27.
ü The right side hood is open.
 To tension the drive chain(1), use the nut(2) to set the dimension X=220mm.
INFORMATION
The drive chain is supplied with oil via the central chain lubrication system, refer to page94.