Krone 1022623 - Oils; Lubricating Greases

5 Technical data
5.1 Consumables
44
Comprima F 155
Original Operating Instructions 150001049_01_en
NOTICE
Machine damage due to mixing of oil
If oils, which have different specifications, are mixed with each other, the machine may be
damaged.
 Never mix oils, which have different specifications, with each other.
 Contact your KRONE service partner before using an oil with a different specification after
changing the oil.
Biodegradable consumables can be used on request.
5.1.1 Oils
Designation Filling quantity Specification
T-gearbox main drive 2.00 L SAE 90
Central chain lubrication system 7.00 L SAE 10W-40
5.1.2 Lubricating greases
A lubricating grease according to DIN 51818 of NLGI class2 (Li soap with EP additives) must
be used for the lubrication points. KRONE recommends not using lubricating greases with any
other base material.
The filling quantity is as required. Lubricate the lubrication points until lubricating grease comes
out of the bearing position. After lubricating, remove the grease coming out of the bearing
position.