Krone 1022623 - KRONE ALPHA Operation Unit

KRONE ALPHA operation unit 9
Comprima F 155
Original Operating Instructions 150001049_01_en 97
9 KRONE ALPHA operation unit
For “medium electronics” version
NOTICE
Penetration of water in the operation unit could lead to malfunction. As a result, the
machine can no longer be operated safely.
 Protect the operation unit from water.
 If the machine is not used for an extended period of time (for example in winter), the
terminal must be stored in a dry place.
 For installation and repair work, especially for welding jobs on the machine, interrupt the
voltage supply to the operation unit.
ABCDEFGH
2
3
6
7
8
10
9
1
2
EQ001-211
The electronic equipment of the machine consists essentially of the job computer, the operation
unit and the control and function elements.
The job computer (1) is located on the right-hand side of the machine under the side hood.
Its functions are:
• Control of the actuators installed on the machine
• Sensor/actuator diagnostics
The operation unit (2) provides the driver with information and makes settings for the operation
of the machine which are received and processed by the job computer.