Machine description 4
Function description net and chamber film wrapping 4.5
Comprima F 155
Original Operating Instructions 150001049_01_en 41
When tying is started, the feed rocker arm(16) guides the wrapping material (net or film) via the
feed unit(13) onto the feed roller(12). The feed roller(12) guides the wrapping material (net or
film) between the compression rollers(11) to the round bale and pulls it off the round bale.
When the tying cycle of the set number of net or film layers is complete, the cutting unit(10)
swings over the wrapping material (net or film) and cuts the wrapping material (net or film).
To Next Page
Loading...
