Krone 1022623 - Page 89

Operation 8
Net and chamber film wrapping 8.16
Comprima F 155
Original Operating Instructions 150001049_01_en 89
3
2
1
RPG000-183
ü Net or chamber film wrapping has been selected on the terminal, refer to page138.
 Move the feed rocker arm(3) on the terminal in the feed position direction of arrow until
there is a distance of approx. 5cm between the pressure shaft(2), covered with red foam,
and the conical roller(1), refer to page140.
6
7
5
8
1
12
11
2
3
4
X
9
10
RP000-183
The feed plate(7), which is required to insert the wrapping material, is in the storage
compartment on the right side.