Krone Big Pack 890 HS - Page 119

KRONE ISOBUS-Terminal CCI 100
119
Pos: 24.84 /BA/Inf o-Center/CC-ISOBUS- Terminal/CCI-Bi G Pack/Hauptmenüs/Haupt menü 2 Zähler/Kundenzähler aktivieren HS Baurei he @ 63\mod_13000957212 03_78.doc @ 578142
Activating customer counter
CC000037
2-1
Fig.75
• Select the desired customer counter (A) by pressing the function key
or and
activate it by pressing the function key
. The desired customer counter (in this case
customer counter 2) is shown inverted (
2
).
Pos: 24.85 /BA/Inf o-Center/CC-ISOBUS- Terminal/CCI-Bi G Pack/Hauptmenüs/Haupt menü 2 Zähler/Ballenanzah l verändern @ 44\mod_12 75464641625_78.doc @ 391671
Changing the number of bales
• Press function key
or to select the desired customer counter (A) (the customer
counter must not be activated)
• Select the counter (cut bales, uncut bales) to be changed via the function key
or
• Increase the number of bales by pressing the function key
• Reduce the number of bales by pressing the function key
At the same time, the season and daily counters are also changed in menu 2-2 "Total bale
counter”, as well as the length counter and knot counter.
Pos: 24.86 /BA/Inf o-Center/CC-ISOBUS- Terminal/CCI-Bi G Pack/Hauptmenüs/Haupt menü 2 Zähler/Kundenzähler löschen @ 44\mod_127 5465544203_78.doc @ 391700
Deleting the customer counter
• Press function key
or to select the desired customer counter (A) (the customer
counter must not be activated)
• By pressing the function key
the selected customer counter is set to zero
• Pressing the function key
closes the called up menu
• Pressing the function key
and holding it down brings up the basic screen
Pos: 24.87 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165