Krone Big Pack 890 HS - Page 41

Safety
41
1)
Before starting the machine,
read and observe the operating
instructions and safety
instructions.
Order No. 939 471 -1 (1x)
2)
The PTO speeds must not exceed 1000 rpm!
The operating pressure of the hydraulic system
must not exceed 200 bar / 2900 PSI!
939 101-4
MAX.1000/ min
MAX. 200 bar
Order No. 939 101 -4 (1x)
3)
Danger from rotating auger.
Order No. 939 520 1 (2x)
4)
Never reach into the working
area of the pick-up as long as
the machine is running.
Order No. 939 407-1 (2x)
5)
Do not climb onto the machine if
the PTO is connected and the
engine is running.
Order No. 939 408-2 (1x)
6)
Before start-up close the protective equipment!
Order No. 942 002-4 (14x)
7)
While parts are moving, never
reach into areas where there is a
risk of being crushed.
(only for roller chute and cutting
system XC)
Order No. 942 196 1 (5x)
8)
Maintain a sufficient distance from hot surfaces.
(optional)
Order No. 942 210-0 (1x)
9)
Do not stay in the swivel range of the chute.
Keep your distance!
Order No. 939 469 -1 (2x)
Pos: 10.13 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165
939 520-1
942 196 -1