page 14 Computer system
CAUTION
Damage due to improper driver installation
If the Mil-Lite patch is not installed the frame grabber board can be damaged.
Carry out the installation in exact accordance with the following instructions.
Step 1: Installation of the software PFRemote.
PFRemote is software for camera control. KRÜSS has worked out standard
parameters for the high-speed camera which are transferred to the DSA4
software with the help of prepared parameter files. ( DSA4 manual, chapter
about high-speed cameras.)
1. After switching on the computer, terminate the Windows hardware assistant.
2. Insert the DSA3-CD-ROM. Select the folder Cameras/PxH/PFRemote and start
the program PFInstallerxx.exe. Continue the installation with Next.
xxx stands for the version number inside the filename.
3. Confirm your license agreement and click on Next.
4. Skip the following information page about different camera models with Next.
5. Confirm the proposed installation directory with Next (recommended) or
choose a different directory using Browse.
To Next Page
Loading...
Need help?
General
