Computer system page 13
3. Select the option Never search Windows Update for drivers and click on OK.
Later, when the installation process is finished, the option Ask me to search
…
can be selected if this Microsoft service is desired.
However, we do not recommend the first option without asking me.
SPAC S PA C S PAC SPAC
4.2.2 Frame grabber driver for CF3200/3201
After switching-on the PC the Windows hardware assistant detects the new board.
The assistant for driver installation starts.
All drivers required for installation are located on the DSA1/DSA3/DSA4 CD.
After installing the frame grabber the DSA1/DSA3/DSA4 software can be
installed. Further information is given in the DSA1/DSA3/DSA4 manual.
Let the assistant search for the drivers on the DSA1/DSA3/DSA4 CD. The drivers
will be installed automatically after confirmation with OK.
SPAC S PA C S PAC SPAC
4.2.3 Frame grabber driver for CF3220/21
First close all running programs; several re-boots are necessary during the
installation process.
The installation of the driver is to be performed in several steps:
Step 1: Installation of the software “PFRemote”.
Step 2: Frame grabber driver installation.
Step 3: Installation of the “Mil-Lite” patch.
Step 4: Possibly necessary: firmware update of the frame grabber.
Step 5: Reducing the hardware acceleration
To Next Page
Loading...
Need help?
General
