Mounting axes page 53
7.7.10 Mounting the ST13 miniature sample table (optional)
The optionally available ST13 sample table for positioning samples horizontally can
be mounted in two directions:
forwards with the adjusting screw for positioning perpendicular to the optical
axis
to the right with the adjusting screw for positioning along the optical axis
Adjusting screw forwards
Fix the table with the four hexagon socket screws supplied.
Adjusting screw right
1. Loosen the two knurled screws and remove the sample stage from the holder
together with the mount.
.
To Next Page
Loading...
Need help?
General
