Setting up page 25
The following dialog opens:
Select the occupied COM-port from the drop-down menu.
Assignment in DSA3/DSA4
Select the menu option Tools System Settings.
The following dialog opens:
Select the occupied COM-port from the drop-down menu marked above.
SPAC S PA C S PAC SPAC
5.7 Protective glass
A protective glass to be attached to the front panel is supplied with the instrument.
The protective glass prevents accidental contact with the needle tip to avoid
injury or poisoning risks. This protective glass should only be removed when
conversion work is being carried out.
To Next Page
Loading...
Need help?
General
