Kubota D1803-CR-E4 - Page 295

(13) Instruction (14) OK button
7. Click the [Close] button (15) to exit function.
(15) Close button
Clear DTC
1. Connect
the
reprogrammed service engine ECU to
the engine, then key switch ON.
2. Start "Diagmaster", then click the [DTC] button (16)
from the project window.
(16) DTC button
3. Click the [Clear DTC] button (17).
(17) Clear DTC button
4. Click
the [Clear
DTC] button (18) to clear DTC and
exit function.
(18) Clear DTC button
DPF manual regeneration
1.
Perform the DPF manual regeneration.
RELATED PAGE
7.58 Replacing DPF on page 4-196
SERVICING
7. Servicing 4. ENGINE
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
4-195
KiSC issued 12, 2018 A