Kubota D1803-CR-E4 - Page 297

(8) DPF Soot Load Reset item (9) Proceed button
3. Enter the "DPF/DOC part number and DPF/DOC
serial number" (10), then click the [OK] button (11).
(10) DPF/DOC part number and
DPF/DOC serial number
(11) OK button
4. Follow
the
instructions according to steps of
"Notes" screen (12), then click the [Start] button
(13).
(12) Notes screen (13) Start button
5. Click the [OK] button to exit function.
(14) OK button
DPF manual regeneration
1. Start "Diagmaster", then click the [Utility] button
(15) from the project window.
(15) Utility button
2. Select
the
"DPF Manual Regeneration Request
Function" item (16).
3. Follow the instructions according to steps of
"Instruction" screen (17), then click the [proceed]
button (18).
(16) DPF Manual Regeneration
Request Function item
(17) Instruction screen
(18)
Proceed button
4. Select the
"#DPF Manual Regeneration Request
Function" (19) from "Select Signal Group".
SERVICING
7. Servicing 4. ENGINE
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
4-197
KiSC issued 12, 2018 A