Kubota D1803-CR-E4 - Page 298

(19) #DPF Manual Regeneration
Request Function
5. Click the [Start Active Test] button (20).
(20) Start Active Test button
6. Confirm
caution
description, then click the [OK]
button (21).
(21) OK button
7. Click
the [Send
Specified Active Test Value]
button (22).
(22) Send Specified Active Test
Value button
8.
To start DPF manual regeneration, click the [DPF
manual regeneration]
button on the machine.
9. Observe the data monitor until the "DPF
regeneration control level / status" (23) value
becomes "0".
(23) DPF regeneration control
level / status
10. Click
the [Finish
Active Test] button (24) to stop
the data monitor, then click the [Save] button (25)
to save monitor data.
(24) Finish Active Test button (25) Save button
11. Click
the [Back
to Item Select] button (26) to exit
from active test.
4. ENGINE
SERVICING
7. Servicing
4-198
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
KiSC issued 12, 2018 A