Kyocera ECOSYS MA4500x

8-19
Setup and Registration (System Menu) > System Menu
Optional Network
[System Menu/Counter] key > [ ] [ ] key > [System/Network] > [OK] key > [ ] [ ] key > [Optional Network] >
[OK] key
Configure settings for the optional Network Interface Kit.
Setup
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Item Description
ConnectionStatus When the optional Wireless Network Interface Kit is installed, you can check the wireless LAN
status.
Quick Setup If the machine will connect to an access point that supports the automatic wireless network
setup, connection settings can be configured by Quick Setup.
AvailableNetwork Displays access points to which the machine can connect.
Push Button If the access point supports the push button method, wireless settings can be configured
using the push button. This setting executes push button, and the connection is started
by pressing the push button on the access point.
NOTE
The push button method supports only the WPS.
PIN (Device) Starts connection using the machine's PIN code. Enter the PIN code into the access point.
The PIN code of the machine is automatically generated.
PIN (Terminal) Starts connection using the PIN code of the access point. Enter the PIN code of the access
point.