Kyocera ECOSYS MA4500x - Page 321

8-35
Setup and Registration (System Menu) > System Menu
Timer Setting
[ System Menu/Counter ] key > [] [] key > [ Common Settings ] > [ OK ] key > [] [] key > [ Timer Setting ] >
[
OK ] key
Configure settings related to the time.
Item Description
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to
the default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
The time allowed to elapse before the panel is reset is set with the "PanelReset
TimerPanel Reset Timer".
PanelReset Timer (page 8-35)
PanelReset Timer If you select [ On ] for Auto Panel Reset, set the amount of time to wait before Auto Panel
Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
Low Power Timer Set amount of time before entering the Low Power mode.
Value
For Europe: 1 to 120 minutes (1 minute increments)
Except for Europe: 1 to 240 minutes (1 minute increments)
Low Power Mode (page 2-28)
Sleep Level (models except
for Europe)
*1
Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than
Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
(Detailed settings) Set whether to use the Energy Saver mode for the following functions individually:
• Card Reader
*2
• Application
Value: Off, On
NOTE
When the machine enters Energy Saver, the ID card cannot be recognized.
Sleep Rules (models for
Europe)
Select whether to use the Sleep mode for the following functions individually:
• Card Reader
*2
• Application
Value: Off, On
NOTE
When the machine enters Energy Saver, the ID card cannot be recognized.
Sleep Timer Set amount of time before entering Sleep.
Value
For Europe
1 to 120 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
Sleep Rules (models for Europe) (page 2-29)