10-18
Troubleshooting > Troubleshooting
Part of the image is
periodically faint or shows
white lines.
Are the developing unit and drum
unit installed correctly?
Remove and correctly re-install the
developing unit and drum unit.
―
― Open and then close the right cover. ―
― Select the [System Menu/Counter]
key > [Adjust/Maint.] > [Service
Setting] > [Drum Refresh], and
then select [Yes].
―
The previous image
remains and lightly
printed.
― Make sure the paper type setting is
correct for the paper being used.
page 8-33
Print on the back of the
sheet is visible on the
front.
― Set [Prevent Bleed-t] to [On].
page 6-16
page 8-37
Symptom Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
