Labconco Logic+ A2 - Adjusting Blower Speed

41
Adjusting Blower Speed
During initial or annual certification of the biosafety cabinet, the blower speed may need
to be adjusted. Blower speed must only be adjusted by a trained, qualified certifier. To
adjust the blower speed, following these instructions.
1. From the Main Menu, press [MENU], using [UP] or [DOWN] select the Tools
icon. Press [OK/MUTE].
2. Use [UP] or [DOWN] to select the Password icon, press [OK/MUTE].
3. From the Warning Screen, press [OK/MUTE] to acknowledge the warning that
the following screens are restricted.
[MENU]
Tools
Password
[OK/MUTE]
WARNING !
RESTRICTED AREA
FOR TECHNICIAN
USE ONLY