EasyManua.ls Logo

Lenovo ThinkSystem SR670 V2 - Page 11

Lenovo ThinkSystem SR670 V2
390 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 1. General specifications (continued)
Specification
Description
Integrated functions Lenovo XClarity Controller (XCC), which provides service processor control and
monitoring functions, video controller, and remote keyboard, video, mouse, and
remote drive capabilities.
One system-management RJ-45 connector on the rear to connect to a systems-
management network. This connector is dedicated to the Lenovo XClarity
Controller functions and runs at 1 GB speed.
A group of two or four Ethernet connectors on OCP 3.0 Ethernet adapter
Up to four USB 3.2 Gen1 ports:
Three on the rear of the server
(Optional) One on the front of the server
1
.
One internal USB 3.2 Gen1 port
(Optional) One USB 2.0 port on the front of the server
1
.
(Optional) External LCD diagnostics handset connector on the front of the server
1
.
Up to two VGA connectors
One on the rear of the server
(Optional) One on the front of the server
1
.
(Optional) One serial port connector on the rear of the server
2
.
Notes:
1. Available when the front I/O module is installed in the server.
2. Available when the serial port cable is installed in the server.
Network
OCP 3.0 Ethernet network adapter
Rear button NMI button
RAID adapter Hardware RAID 0, 1, 10, 5, 50
ThinkSystem 530-8i Internal SAS/SATA RAID
RAID 0, 1, 10, 5, 50, 6, 60
ThinkSystem 930-8i Internal SAS/SATA RAID w/ 2GB Cache
ThinkSystem 930-8e External SAS/SATA RAID (0, 1, 10, 5, 50, 6, 60) w/ 4GB
Cache
ThinkSystem 940-8i Internal SAS/SATA/NVMe RAID (0, 1, 10, 5, 50, 6, 60) w/ 4GB
Cache
ThinkSystem 940-8i Internal SAS/SATA/NVMe RAID (0, 1, 10, 5, 50, 6, 60) w/ 8GB
Cache
Host bus adapter
ThinkSystem 430-8i Internal SAS/SATA
ThinkSystem 430-8e External SAS/SATA
System fan
Five 80 mm x 80 mm x 56 mm dual-rotor fans
Minimal configuration for
debugging
Two processors in socket 1 and 2
Two DRAM memory modules in slots 14 and 30
Two power supplies in bay 1 and 2
One boot drive, M.2, 2.5-inch, 3.5-inch, or EDSFF drive, and RAID adapter if
configured. (If OS is needed by debugging)
Five system fans
Chapter 1. Introduction 3

Table of Contents

Related product manuals