Figure 98. SXM GPU Model front I/O module cable routing
After you finish
Complete the parts replacement. See “Complete the parts replacement” on page 328.
Front panel replacement
Follow instructions in this section to remove or install the front panel.
Remove the front panel
Follow instructions in this section to remove the front panel.
About this task
Attention:
• Read “Installation Guidelines” on page 121 and “Safety inspection checklist” on page 122 to ensure that
you work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 14.
Chapter 4. Hardware replacement procedures 155
To Next Page
Loading...
