Figure 86. Attaching the external LCD diagnostics handset to a metal surface
After you finish
Complete the parts replacement. See “Complete the parts replacement” on page 328.
Fan cage replacement
Follow instructions in this section to remove and install the fan cage.
Remove the fan cage
Follow instructions in this section to remove the fan cage.
About this task
Attention:
• Read “Installation Guidelines” on page 121 and “Safety inspection checklist” on page 122 to ensure that
you work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 14.
• If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover,
or remove the server from the rack. See “Remove the server from rack” on page 124.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-BXei6L6c05osQVLt4w5XYx
• Youku: https://list.youku.com/albumlist/show/id_59636529
Chapter 4. Hardware replacement procedures 143
To Next Page
Loading...
