Drive backplane cable routing
Connect the drive backplane signal cables and power cables as illustrated.
Figure 58. Drive backplane cable routing – Configuration F
From To
Drive backplane (right side)
1 NVMe 2-3
System board
1 PCIe connector 16
2 NVMe 0-1
2 PCIe connector 16
3 Power connector 3 Backplane power 1 connector
Drive backplane (left side)
4 NVMe 2-3
4 PCIe connector 15
5 NVMe 0-1
5 PCIe connector 15
6 Power connector Retimer assembly 6 Backplane power connector
Chapter 3. Internal cable routing 109
To Next Page
Loading...
