Make sure to have three people operate the server removal procedures to prevent injury.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-BXei6L6c05osQVLt4w5XYx
• Youku: https://list.youku.com/albumlist/show/id_59636529
Procedure
Step 1. Loosen the two thumbscrews located on the front of the server to disengage it from the rack.
Rack front
Figure 69. Disengaging server from the rack
1
Thumbscrew
Step 2. Hold the mounting ears on the front of the server; then, slide the server all the way out until it stops.
Figure 70. Pulling out the server
Chapter 4. Hardware replacement procedures 125
To Next Page
Loading...
