CAUTION:
Do not place any object on top of a rack-mounted device unless that rack-mounted device is intended
for use as a shelf.
About this task
Attention:
• Read “Installation Guidelines” on page 121 and “Safety inspection checklist” on page 122 to ensure that
you work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 14.
CAUTION:
Make sure to have three people operate the server installation procedures to prevent injury.
Watch the procedure. A video of the installation and removal process is available:
• YouTube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-BXei6L6c05osQVLt4w5XYx
• Youku: https://list.youku.com/albumlist/show/id_59636529
Procedure
Step 1. From the front of the rack, pull the rails all the way out until they stop
Attention: You can only install the server successfully when the rails are fully extended.
Rack front
Figure 73. Pulling out the rails
128 ThinkSystem SR670 V2 Maintenance Manual
To Next Page
Loading...
