Tool
Update
Methods
Suppor-
ted
Core
System
Firmware
Updates
I/O
Devices
Firm-
ware
Updates
Graphi-
cal user
interface
Com-
mand
line
interface
Supports
UXSPs
Lenovo XClarity Integrator (LXCI) for
Microsoft System Center Configuration
Manager
In-band
On-
Target
√
All I/O
devices
√ √
Notes:
1. For I/O firmware updates.
2. For BMC and UEFI firmware updates.
• Lenovo XClarity Provisioning Manager V3
From Lenovo XClarity Provisioning Manager V3, you can update the Lenovo XClarity Controller firmware,
the UEFI firmware, and the Lenovo XClarity Provisioning Manager V3 software.
Note: By default, the Lenovo XClarity Provisioning Manager V3 Graphical User Interface is displayed
when you press F1. If you have changed that default to be the text-based system setup, you can bring up
the Graphical User Interface from the text-based system setup interface.
Additional information about using Lenovo XClarity Provisioning Manager V3 to update firmware is
available at:
https://sysmgt.lenovofiles.com/help/topic/LXPMv3/platform_update.html
• Lenovo XClarity Controller
If you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specific
server.
Notes:
– To perform an in-band update through Windows or Linux, the operating system driver must be installed
and the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.
Additional information about configuring Ethernet over USB is available at:
http://sysmgt.lenovofiles.com/help/topic/com.lenovo.systems.management.xcc.doc/NN1ia_c_
configuringUSB.html
– If you update firmware through the Lenovo XClarity Controller, make sure that you have downloaded
and installed the latest device drivers for the operating system that is running on the server.
Specific details about updating firmware using Lenovo XClarity Controller are available at:
http://sysmgt.lenovofiles.com/help/topic/com.lenovo.systems.management.xcc.doc/NN1ia_c_
manageserverfirmware.html
• Lenovo XClarity Essentials OneCLI
Lenovo XClarity Essentials OneCLI is a collection of command line applications that can be used to
manage Lenovo servers.Its update application can be used to update firmware and device drivers for your
servers. The update can be performed within the host operating system of the server (in-band) or remotely
through the BMC of the server (out-of-band).
Specific details about updating firmware using Lenovo XClarity Essentials OneCLI is available at:
http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_c_update.html
• Lenovo XClarity Essentials UpdateXpress
12
ThinkSystem SR670 V2 Maintenance Manual
To Next Page
Loading...
