Lenovo ThinkSystem SR670 V2 - Page 248

Figure 173. Removing the EDSFF drive cage cover
Step 2. Remove the EDSFF hot-swap drive.
a.
Slide the release latch to unlock the drive handle.
b.
Rotate the drive handle to the open position.
c.
Grasp the handle and slide the drive out of the drive bay.
Figure 174. Removing an EDSFF hot-swap drive
Step 3. Install a drive bay filler or replacement drive as soon as possible. See “Install an EDSFF hot-swap
drive” on page 241.
Step 4. Reinstall the EDSFF drive cage cover back to the server.
240
ThinkSystem SR670 V2 Maintenance Manual