Drive backplane cable routing
Connect the drive backplane signal cables and power cable as illustrated.
Figure 37. Drive backplane cable routing – Configuration C
From To
Drive
backplane
1 NVMe 6-7
System board
1 PCIe connector 16
2 NVMe 4-5
2 PCIe connector 16
3 SAS 3 SATA 1 connector and SATA 2 connector
4 Power connector 4 Backplane power 1 connector
5 NVMe 2-3
5 PCIe connector 15
6 NVMe 0-1
6 PCIe connector 15
78 ThinkSystem SR670 V2 Maintenance Manual
To Next Page
Loading...
