Lenze 9300 vector Series - Thermally Separated Mounting (Push−Through Technique)

Mechanical installation
Standard devices in the power range 75 ... 90 kW
Thermally separated mounting (push−through technique)
4

163
EDKVF9333V DE/EN/FR 7.2
4.5.3 Thermally separated mounting (push−through technique)
For mounting in push−through technique, the drive controller of type EVF93xx−EV must be
used. In addition, the mounting set EJ0009 for push−through technique is required.
Dimensions
h
c1
c2
c3
c4
g
a1
a
d1
h
d2
d2
d2
d
b
b1
e1
e
L
9300vec118
Fig. 4−16 Dimensions for thermally separated mounting 75 ... 90 kW
9300 vector Dimensions [mm]
Type a a1 b b1 c1 c2 c3 c4 d d1 d2 e
1)
e1 g h
EVF9332−EV
EVF9333−EV
488 450 718 680 49 172.5 295.5 419.5 698 49 200 285 164 9 10
1)
For a fieldbus module plugged onto X1, consider mounting space for connecting cables
Mounting cutout in control cabinet
9300 vector Dimensions [mm]
Type Width Height
EVF9332−EV
EVF9333−EV
428.5 660