User Manual Liebert Hipulse E Chapter 11 – ‘1+N System’
Single or '1+N' UPS System
(07/04) Page 11-13
11.3 Display panel message interpretation '1+N' System
The alarms are the same as for the single module, as given in the previous paragraph, with the additional alarms:
CODE
DISPLAY ALARM
MESSAGES
INTERPRETATION
44 INV: PARALLEL ERROR
The parallel board has detected a wrong sharing of the load and
has blocked its inverter. Seek qualified assistance.
46 NR. INVERTERS NOT OK
The number of active inverters is below the preset capacity value.
To Next Page
Loading...
