Installation Manual Liebert Hipulse E Single or '1+N' UPS System
(07/04) Page iii
This manual contains information concerning the installation, and operation of the Liebert Hipulse E Single Module
(Expandable) Uninterruptible Power System (UPS).
All relevant parts of the manual should be read prior
to commencing installation.
The UPS must be commissioned and serviced by an engineer approved by the manufacturer (or his agent).
Failure to do could result in personnel safety risk, equipment malfunction and invalidation of warranty.
The Liebert Hipulse E UPS has been designed for Commercial/Industrial use only, and is not recommended
for use in any life support applications.
Warning: This is a product for restricted sales distribution
to informed partners.
Installation restrictions or additional measures may be needed to prevent disturbance.
(See EN 50091-2)
When Class A option is fitted, this is a Class A UPS (for Unrestricted sales distribution).
Anyway in a domestic environment this product may be cause radio interference in which case, the user may be
required to take additional measures.
(See EN 50091-2)
If you encounter any problems with the procedures contained in this manual
you should seek immediate assistance from the Liebert Sales Office
from whom the equipment was purchased.
Alternatively, contact the Liebert's Customer Service & Support department
at the address shown below:
Liebert HIROSS Services (HQ)
Customer Service and Support Department
Via Leonardo da Vinci 8
35028 - Piove di Sacco (PD)
Italy
Help Desk Telephone +39 049 9719311
Fax +39 049 9719053
service@liebert-hiross.com
Emerson Network Power Ltd - United Kingdom
Customer Service and Support Department
Globe Park
Marlow
Buckinghamshire SL71YG
United Kingdom
Telephone +44 1628 40 32 00
Fax +44 1628 40 32 03
Please visit our web site: http://ups.liebert-hiross.com/
While every precaution has been taken to ensure accuracy and comleteness in this manual, Liebert Corporation
assumes no responsibility and disclaims all liability for damages resulting from use of this information or for
any errors or omissions.
Liebert Corporation pursues a policy of continual product development and reserves the right to change the
equipment design without notice.
Copyright 2004 by Liebert Corporation.
Unauthorized reproduction prohibited
All rights reserved.
To Next Page
Loading...
Need help?
General
