Liebert Hipulse E - Page 96

Chapter 9 - Operating Instructions Liebert Hipulse E User Manual
Procedure Single or '1+N' UPS System
Page 9-4 (07/04)
The message shown below, will be seen on the default screen whenever the
UPS is operating normally:
The UPS is operating normally with its inverter supplying the load.
ECOMODE: The following message will appear in the default screen
whenever the UPS is operating in ECOMODE. The load is supplied by the
Bypass Mains.
The UPS is operating in ECOMODE with the Bypass Mains supplying the load.
NORMAL OPERATION
HH.MM.SS DD.MM.YY
NORMAL OPERATION
(ECOMODE)
HH.MM.SS DD.MM.YY